• Home  / 
  • Guide
  •  /  Best Siding Nailers Reviews for 2019: Top 6 Coil and Power Siding Nailers

Best Siding Nailers Reviews for 2019: Top 6 Coil and Power Siding Nailers

best siding nailers reviews 2019

Are you confused about which siding nailer to choose? We know how difficult it is to find the right one. There are a lot of brands to choose from, and each of the brands has its unique features to offer.

For example, Hitachi will give you an option for quickly changing modes from contact to sequential. On the other hand, Bostitch is useful for working with both plastic and wire nails.

So, to make it easier for you to choose the right one, our experts have volunteered to research the best ones and have created this best siding nailers reviews for you. We can assure you that our article can provide you with sufficient information about choosing the right product.

Best Siding Nailers Reviews with the comparison

BOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing
Hitachi NV65AH2 Coil Siding Nailer, 2-1/2-Inch
  • Hitachi NV65AH2
  • Power Source
  • Operating Pressure
  • Item Weight
    6.4 pounds
Dewalt DW66C-1R 15 Degree 2-1/2 inches Coil Siding Nailer
  • Dewalt DW66C-1R
  • Power Source
  • Magazine Capacity
  • Item Weight
    10.15 pounds
Bostitch Cap Nailer Model N66BC-1
  • Bostitch Cap Nailer N66BC-1
  • Power Source
  • Magazine Type
    Canister Loading
  • Item Weight
    5.8 pounds
Freeman PCN65 Coil Siding Fencing Nailer
  • Freeman PCN65
  • Operating Pressure
    70-110 PSI
  • Fastener Gauge
    13-14 GA
  • Operating Pressure
    70-100 psi
Makita AN611 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer
  • Makita AN611
  • Power Source
  • Operating Pressure
    65-120 PSI
  • Net Weight
    5.1 lbs

#1. BOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing

BOSTITCH can be very reliable when it comes to power tools as they are providing excellent services to their customers for a long time. When it comes to siding nailers, they are not lagging. Here are the main features of the BOSTITCH N66C-1 given below to let you know what it is capable of doing.

BOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing
Power Source: Air
Collation Angle: 15 Degree
Air Inlet Size: ¼ Inch NPT
Fastener Length: 1.25 to 2.50 Inches
Fastener Feeding Type: Coil
Fastener Diameter: 0.080 to 0.092 Inches
Firing Mode: Sequential/Bump Action
Feed Type: Coil Feed
Magazine Capacity: 300 Nails
Operating Pressure: 65 to 100 PSI
Nail Length: 1 ¼ to 2 ½ Inches
Magazine Loading: Top

What We Liked
  • Depth adjustment system is fast.
  • Both plastics inserted and wire wields nails are compatible.
  • Can prevent damage on a soft wooden object.
  • The aluminum body makes it lightweight but durable.
  • High magazine capacity for long time use.
  • The exhaust can be adjusted without any tool.

What We Didn't Like
  • Cannot drive the nails in flush.
  • The driver freezes sometimes.

Features & Benefits

With the BOSTITCH N66C-1 Coil Siding Nailer, you will get depth guide sets that are adjustable. This will allow you to set your nails to the desired depth quickly.

The foot of this nailer contains soft rubber which is essential for a siding nailer. Because such foot can prevent soft objects from getting damaged.

In this siding nailer, you will get an exhaust system which is adjustable. This system can help you to keep the exhaust materials away from you as they can be harmful if they are in contact with you.

The whole body of this nailer is made of aluminum. Aluminum helps this nailer to be very light in weight that allows you to hold it for longer without getting tired. At the same time, it makes the nailer durable.

This nailer can drive both plastic inserted nails and wire nails. If you don’t like wire nails or need to use plastic nails for some reason, you can surely rely on this nailer.


Even with the minor flaws, this nailer can still provide the best services to your nailing works. You should get this nailer, and we can assure you that you will find its performance quite good. We can assure you that choosing this one won’t be a waste of your money.

#2. Hitachi NV65AH2 Coil Siding Nailer, 2-1/2-Inch

Hitachi is a brand most famous for electronics, and they have satisfied their customers for over a hundred years. Aside from electronic devices, they are quite renowned for power tools as well.

One of their most reliable power tools is the Hitachi NV65AH2 siding nailer. From quick reloading to changing modes, all are available in this nailer. More details about this nailer are given below.

Hitachi NV65AH2 Coil Siding Nailer, 2-1/2-InchHitachi NV65AH2 Coil Siding Nailer, 2-1/2-Inch
Collation: Plastic/Wire Sheet, Coil
Magazine Angle (Plastic): 15 Degrees
Magazine Angle (Wire): 16 Degrees
Fastener Diameter Range: 0.090 to 0.099
Fastener Length Capacity: 1 ½ to 2 ½ Inches
Magazine Loading: Side
Magazine Capacity: 200 to 300 Nails
Operating Pressure: 70 to 120 PSI
Air Inlet: 3/8 Inches
Drive Depth: Tool Free
Actuation: Sequential or Contact

What We Liked
  • Accepts both plastic and wire nails.
  • Outlet speed can be controlled.
  • Lightweight and sturdy.
  • The grip is made of elastomer for good handling.
  • Depth adjustment control is effortless.
  • For protection, contains a plastic shield.

What We Didn't Like
  • No hook could ease up the handling.
  • It is a bit expensive.

Features & Benefits

In the Hitachi NV65AH2 Coil Siding Nailer, you will get a selective actuation switch. This switch can be used for changing modes from sequential to contact nailing. So, either of the nailings is possible with this siding nailer.

This is a side-load nailer, and the magazine has a tilted bottom. So, you can quickly reload your nailer if you use this one. By doing so, you can save a lot of your working time.

With this nailer, you will get a plastic shield that adds safety to the nailer. Without such protection, there is a risk of misfiring and causing harm to surround people. But the shield helps to avoid such injuries.

You can adjust the depth of the drive of this nailer. Adjusting the depth is necessary for various applications. To complete all applications correctly, this nailer can help you by adjusting the depth of the drive.


Although it is a bit expensive, this nailer gets your job done smoothly. Also spending a little on the excellent product will benefit you in the long run. In fact, by choosing this nailer, you can easily do your nailing jobs without any risk of accidents. So, if you are willing to spend a little, we recommend you to spend it on the right one.

#3. Dewalt DW66C-1R 15 Degree 2-1/2 inches Coil Siding Nailer

If you want your nailer to last longer and also provide a reliable service we recommend you to choose the Dewalt DW66C-1R Coil Siding Nailer. This nailer has components like bumpers and drivers that increase the lifespan of the nailer.

But this is not the only useful feature you get. There are a lot more this nailer can provide. I have given the details about them below.

Dewalt DW66C-1R 15 Degree 2-1/2 inches Coil Siding NailerDewalt DW66C-1R 15 Degree 2-1/2 inches Coil Siding Nailer
Depth Adjustment: Tool Free
Exhaust: Adjustable
Collation Type: Coil
Fastener Diameter: 0.080 to 0.092 Inches
Fastener Length: 1 ¼ to 2 ½ Inches
Gauge Type: 15 Degree (Coil)
Magazine Angle: 15 Degree
Nail Diameter: 0.080 to 0.092 Inches
Firing Mode: Sequential
Magazine Capacity: 300 Nails
Pressure Range: 70 to 120 PSI

What We Liked
  • Sturdy and solid body.
  • Very lightweight.
  • Fine grip for handling.
  • Suitable for both wire nails and plastic nails.
  • Compatible with different nail sizes.

What We Didn't Like
  • Nails get damaged inside if kept unused.

Features & Benefits

The Dewalt DW66C-1R Coil Siding Nailer can drive both plastic and wire nails. This gives you the benefit of using this nailer for different applications as it increases the versatility of the nailer.

In this nailer the air exhaust port is adjustable. We all know that exhaust material from the workpiece can be harmful to us. But with this flexible exhaust port, the harmful substances will always be kept away from you or the workpiece.

This nailer is made of aluminum. Aluminum helps to increase the durability of this nailer. So it won’t get damaged easily, but at the same time, it will be very light in weight for the user to handle it.

There are high wear components like bumpers, drivers, and springs available with this nailer. These components help to increase the tool life of the nailer and the longevity as well.

With this nailer, you will get a depth-of-drive-adjustment feature, and it is tool free. So you can quickly and quickly staple any surface with this nailer.


This nailer contains some drawbacks like nails getting damaged, but this is nothing you can’t handle. The important thing is that it will support you for a long time and this is why we recommend you to pick this nailer.

#4. Bostitch Cap Nailer Model N66BC-1

Here is another siding nailer introduced by Bostitch. This one is a bit different from the previous one and has its unique features. For example, if you have problems in reloading a nailer, the Bostitch Cap Nailer Model N66BC-1 is the perfect catch for you.

Bostitch Cap Nailer Model N66BC-1Bostitch Cap Nailer Model N66BC-1
The depth of Drive: Adjustable
Air Inlet Size: ¼ Inches
Fastener Capacity: 300
Dry Fire Lockout: No
Fastener Type: Coil Nails
Firing Modes: Sequential
Fitting Type: NPT
Fastener Collation: Plastic/Wire Wield
Lubrication: Oil-Lube
Jam Clearance: Open Nose
Magazine Type: Canister Loading
Magazine Angle: 15 Degrees
Min. Fastener Length: 1 ¼ Inch
Max. Fastener Length: 2 ½ Inches
Tip Style: Non-Marring
Operating Pressure: 70 to 120 PSI

What We Liked
  • Solid construction for magnesium housing.
  • The large capacity of the magazine for both plastic and wire nails.
  • Contains a quick reload feature.
  • Suitable to penetrate through hard materials.
  • Nose cap can deliver more firing speed.
  • Air exhaust has versatile positioning.

What We Didn't Like
  • Nail jamming occurs sometimes.
  • Heavier than usual nailers.

Features & Benefits

With the Bostitch Cap Nailer Model N66BC-1, you will get a Dial-A-Depth adjustment feature. This feature will help you to set your nails quickly to the nailer. This helps the nails to be very convenient to fit in the nailer as well.

The magazine of this nailer is not a regular one but a quick-load magazine. This magazine helps you to load nails faster in the nailer. Also, the higher capacity of the magazine allows you to work longer in one reload.

This nailer is fully made of magnesium which is very light in weight. Being lightweight helps you, and so your job becomes less hectic. Also, magnesium helps the tool to be sturdier.

You can adjust the exhaust system of this nailer. Exhaust materials can be both harmful and disturbing while working. So it is necessary to push them away, especially from your eyes. This nailer automatically gets this job done for you.


A little nail jamming won’t bother you much if you are worried about its flaws. What important is that this nailer is very fast in performing nailing operations and can be reloaded more quickly than most other nailers in the market.

If this is what you need in your nailer, our recommendation is the Bostitch Cap Nailer Model N66BC-1.

#5. Freeman PCN65 Coil Siding Fencing Nailer

If you are looking for a nailer that can do more than just nailing wood, you should pick the Freeman PCN65 Coil Siding Fencing Nailer. Because from cement siding installation to plywood nailing, everything can be done with the help of this nailer. You can find more about this nailer below.

Freeman PCN65 Coil Siding Fencing NailerFreeman PCN65 Coil Siding Fencing Nailer
Dimensions: 11 x 5 x 13.25 Inches
Weight: 8 lbs.
Air Inlet Size: ¼ Inches
Fastener Capacity: 200 to 400 Nails
Fastener Collation: Wire/Plastic
Fastener Gauge: 13 to 14 Inches
Fastener Type: Coil Siding Nails (15 Degree)
Fitting Type: NPT
Magazine Angle:15 Degrees
Max. Fastener Length: 2 ½ Inches
Min. Fastener Length: 1 ¼ Inch
Operating Pressure: 70 to 110 PSI

What We Liked
  • Body is solid and sturdy.
  • Cheap but provides excellent performance.
  • The nail coil is very clear.
  • Prevents damages on materials with no-mar tip.
  • Can run for a long time without jamming.

What We Didn't Like
  • The plastic trigger is very weak.
  • Weighs more than general nailers.

Features & Benefits

The most important feature of the Freeman PCN65 Coil Siding Fencing Nailer is its versatile usability. You can use this nailer for sheathing installation, cement siding installation, decking installation, or even in plywood.

You can adjust the drive depth of this nailer. For different nailing operations, you need different depth of drive. By adjusting the drive depth with this nailer, you can get all the operations done successfully and without any problem.

This nailer can use both plastic and wire nails. For some nailing operations, you will need plastic nails, and for others, you will need wire nails. With the help of this nailer, you can get both types of the job done at ease.

This nailer contains a no-mar tip in the front. While working with nailers, your work piece’s surface can get damaged if the tip of the nailer is rough. But the no-mar tip of this nailer helps to prevent such damages.

There is a safety lock included in this nailer. This lock helps to prevent any accident that can occur if the nailer is not in use.


This nailer is very powerful and can be used in so many nailing operations. You have to be careful with some parts like the trigger as it is very weak. Other than that, you can flexibly use this nailer. If you are willing to consider the trigger, you should get this nailer for its versatility.

#6. Makita AN611 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer

There are very few nailers that allow the user to select a mode before nailing. Among these few nailers, we have researched a lot and picked the best one we found so far. And that is the Makita AN611 Coil Siding Nailer.

This nailer can be switched into three different modes for nailing. If you are willing to purchase this one, you should check out our full review about this nailer.

Makita AN611 1-1/4-Inch to 2-1/2-Inch Coil Siding NailerMakita AN611 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer
Power Type: Pneumatic
Operating Air Pressure: 65 to 120 PSI
Minimum Air Delivery: 3.6 SCFM at 90 PSI
Nail Size: 1 ¼ to 2 ½ Inches
Shank Diameter: 0.080 – 0.099 Inches
Maximum Magazine Capacity: 400 Nails
Fastening category: Siding
Dimensions: 5.8 x 15.1 x 15.8 inches
Net Weight: 5.1 Pounds

What We Liked
  • Aluminum body for lightweight and durability.
  • Different sizes of nails can be used.
  • Has a large capacity of the magazine.
  • Provides sequential, bounce and lock work mode.
  • The depth of drive is easy to adjust.
  • For protecting the material surface, it has a soft nose tip.

What We Didn't Like
  • Holding this nailer is hectic.

Features & Benefits

With the Makita AN611 Coil Siding Nailer, you will get a mode selector switch that can select three modes, lock, sequential, and contact. By selecting either of these modes, you can do various nailing operations with the help of this single nailer.

There is a built-in airlifter available with this nailer. This air filter helps to prevent dust from getting into the tool. So your tool will always be cleaner on the inside and won’t get damaged easily.

In this nailer, there is an easy-loading canister available as well. With the help of this canister, you can quickly reload your nailer, and the canister supports different sizes of nailers as well. This makes the nailer more versatile than others.

There are rubber bumpers included in this nailer. This bumper is helpful for protecting the surface of your workpiece from getting damaged.

You can get a smooth nose tip with this nailer as well. This smooth nose tip helps you to prevent any scratching that can occur due to nailing on your work surface.


If you are worried about holding this nailer, you should know that at first, it will be a little hectic. But in time you will surely get the hang of it. And when you do, then you will be able to work like a pro. Other than that, you don’t have to worry about anything else if you are willing to pick this one.

What to Look for When Buying a Siding Nailer?

Now that you are done with our best siding nailers reviews, it is time for you to check out our buying guide. This guide can help you to pick the best tool from the shop. So let’s get started.

While choosing a siding nailer, make sure it has versatile usability. A siding nailer can be used for many nailing operations such as nailing wooden objects or cement made object or others. However, not all the nailers are suitable for all kind of operations. But some nailers can be used for several nailing operations. You can choose according to this versatility.

Performance & Speed
The performance of a nailer partly depends on the user but mostly depends on its quality. If it is a well-manufactured nailer, of course, it will give a good performance. That means it will have good nailing speed. So, before you pick a nailer, see if it has a good speed range so that it can provide excellent performance.

A nailer should be easy to control for a part-time user who uses this occasionally. If you are a professional, then you can use a complex nailer. But if you are not, you should choose a nailer which can be controlled easily.

Ergonomics of a siding nailer means how well the nailer can perform. The performance of a nailer depends on several things, like how long it’s being used, how many times it’s been used, etc. You have to pick a nailer which can perform for a long time without losing its ergonomics.

The power of a nailer indicates how powerful it is when it comes to penetrating a nail through an object. The more the power the harder object a nailer can penetrate without hesitations. So, if you think you have to work with very viable objects, then you should check the power level of the nailer.

Safety Features
A nailer can be a dangerous tool if safety is not insured correctly. If there is a slight misfiring, it can cause serious harm to the user or the surroundings. So, you have to make sure the nailer you are picking has safety measures included. Safety features like locking the nailer when not in use are very important.

It is essential for you to pick a nailer which is quite durable. Because a durable tool will support you for longer. Also, it can handle rough and tough objects without breaking. So, check if your nailer is durable enough before picking one.

Price & Warranty
Having a higher or lower budget for your tools is entirely up to you. But always try to choose the best one within your price range. Also, when you pick a nailer, check its warranty because it will come in handy in times of need.

Select Activation Modes
Different nailers have different activation modes. Each mode has its benefit. But you may not be fond of the complete activation mode. So, check the mode and pick one which you are most comfortable with. If you are new, you may not like any activation mode. In this case, you have to choose the one you are least uncomfortable with.

Always pick a nailer with a good exhaust system. While working with a nailer, there can be harmful exhaust material. A good exhaust system will keep such material away from you, and so you can work comfortably with that nailer.

Types of Siding Nailer

Coil Siding Nailer

In a coil siding nailer, there is a solenoid which propels a metal piston. This piston contains a front rod. The front rod propels the nail. The solenoid can attract the projectile or the piston to the middle portion of the solenoid. In a coil siding nailer, a series of solenoids are used.

By switching off each of the solenoids when necessary, the nailer can get more and more power. This type of siding nailer is used mostly for harder objects. But, by controlling the power, it can also be used for regular objects as well.

Cordless Siding Nailers

A cordless siding nailer has no wire or cord attached to it. It functions similarly to other nailers, but in a cordless nailer, the power source is different. A cordless nailer usually runs on battery rather than on air.

One drawback of a cordless nailer is that it cannot generate higher power, which means you cannot use this nailer for harder objects. But you can certainly use this nailer for sensitive objects as these objects may break if you use other types of nailers.

Pneumatic Siding Nailers

A pneumatic siding nailer runs on air power. That means high pressure due to air makes the nail come out of the nailer. This type of nailer is suitable for versatile works. You can use this for both harder and weaker objects.

As it runs on air power, you need to attach this nailer to an air compressor to provide the power required. The good thing is that you don’t have to worry about changing batteries or anything.

Siding Nailer vs Roofing Nailer

siding nailer vs roofing nailer

Nailers are power tools. They use electricity, sometimes gunpowder, or mostly air to penetrate several nails through surfaces.

There are several types of nailers available, but the most known nailers are siding nailers and roofing nailers. They both look the same, but their functions are different.

Roofing nailers used for nailing roofing materials. On the other hand, siding nailers used for nailing siding material. However, this statement doesn’t clear out a big difference between the two.

To be more specific, roofing nailers are compatible with roof shingles. These are made from fiberglass or asphalt. But siding nailers are compatible with siding materials like wood, or vinyl. Wood and vinyl both are entirely different siding materials, but a siding nailer works with both.

Another way to differentiate these two nailers is by knowing about which types of nails they use. A roofing nailer uses nails that made for using with shingles. They can have a different length, but they possess a similar design.

On the other hand, there are different siding nails available for siding nailers as well. For example, to use with vinyl there are aluminum nails and galvanized siding nails.

Though all the roofing nails are of the same design, siding nails have different models that help it more accessible to identify which is what. So these are all the differences between the two nailers.

Makita vs Hitachi Siding Nailer

makita vs hitachi siding nailer

Both Makita and Hitachi are very famous among the customers of their products. When it comes to siding nailers, both of them have contributed significantly. But there are differences between these two brands.

If you have already read through our best siding nailers reviews, you will see that siding nailers from Makita are comparatively cheaper than that of Hitachi. They are mostly concerned about the safety of their user. So they always try to input different safety features in their product.

Even though Hitachi is a bit expensive compared to Makita, they always provide more feature than Makita. They are more user-friendly. Although they have fewer safety features if you compare it with Makita.

Generally, siding nailer made by Hitachi is more potent than Makita, but Makita is always safer to use. If you are looking for a heavy duty nailer, Hitachi is the right choice for you.

But if heavy duty is not your concern and you need to use nailer for the home only, then you can pick a Makita siding nailer. These are the fundamental differences between these two nailers. Other general functions for both these nailers are quite the same.

How to Use a Siding Nailer?

To make it easier for you to learn the process of using a siding nailer, I have divided the process into some steps. Here are the steps.


First, you have to load your nailer with nails. Every nailer or nail gun has a magazine that will hold the nails for the nailer. So, you have to fill up the magazine carefully and load it into the nailer for using it. Make sure to load fully so that you have to reload quickly.


After you have loaded the nailer, you have to connect it to its power source. Then you have to position the nailer accurately. You have to put the tip of the nailer perpendicular to the surface where you will nail. If you don’t keep it in the right position, the nailer won’t be able to nail correctly.


When you have correctly positioned the nailer, you have to push the trigger of the nailer. Sometimes the trigger may get jammed due to nail jamming. In this case, you have to check the problem and then trigger again carefully. Don’t ever trigger the nailer in an open space. Always punch the trigger when the nailer is facing a surface.


Finally, after you have triggered the nailer, the nail will penetrate through the workpiece. When it penetrates, you have to blow away the dust from the nailer and the workpiece. Some nailers can blow this dust away itself.

Siding Nailer Uses

Nailing similar material

A siding nailer can be used for nailing similar material. For example, you can nail thin layers of woods together with the help of a siding nailer.

Nailing Different material

You can also use a siding nailer for nailing different materials together. For example, if you are trying to nail a wooden frame on your wall, you can use a siding nailer for this task.

Using at home

For domestic use, a siding nailer can be suitable. You can use siding nailer to nail different wooden or other objects at home. In this case, you should pick a siding nailer which is easier to use.

Using Professionally

For many construction works or other professional activities, you can use a siding nailer as well. For example, you can use a siding nailer to nail woods and make a table or a chair out of it.

Siding Nailer Safety Tips

Using a nailer can make your nailing job a lot easier, but this is a dangerous tool to work with. So, while using this tool, you have to keep some things in mind.

First of all, always turn on the safety lock when you are not using the nailer. This way you won’t accidentally trigger the nailer.

Next, you should always keep the nailer pointed to the surface and nowhere else so that it won’t harm you or someone else.

Finally, keep the magazine empty after you are finished with your task so that no one can accidentally hurt someone.

Frequently Asked Questions

#1. Question: What is the best nail gun for siding?
Answer: The BOSTITCH N66C-1 Coil Siding Nailer (paid link) is the best one in the market.

#2. Question: What are the best nails for cedar siding?
Answer: Galvanized stainless aluminum nails are the best nails for cedar siding.

#3. Question: What are the best nails for Hardie siding?
Answer: Electro-galvanized nails are best for Hardie siding.

#4. Question: What nails to use for Hardiplank siding?
Answer: Both hot-dipped galvanized and electro-galvanized nails are suitable for Hardiplank siding.

#5. Question: What is the best coil siding nailer?
Answer: The Hitachi NV65AH2 (paid link) is the best coil siding nailer according to our research.

#6. Question: What are the best nails for wood siding?
Answer: Any nail that is corrosion-resistant, like stainless aluminum nails, is best for wood siding.

#7. Question: Can I use a roofing nailer for siding?
Answer: As roofing nailers use different nails from siding nailers you cannot use roofing nailers for siding.

Final Verdict

A good siding nailer will provide an excellent finishing to your work as you can see. So, our last tip for you would be to choose a siding nailer wisely so that you can get the best output.

Make sure to follow our buying guide accordingly to get the best nailer from the shop. We can assure you that the best siding nailers reviews contain the right product and you don’t have to look elsewhere to find the right one for you.